Our Services
Independent assurance and full-lifecycle delivery — from building design reviews and safety audits offered globally to on-the-ground construction and development.
One partner for design assurance and delivery
Whether you need a second set of expert eyes on a design or a team to build it, we bring the same discipline: understand the brief, measure it against the right standards, and report clearly.
Our services are grouped into independent global advisory work — delivered to clients anywhere — and hands-on construction and development in Madhya Pradesh and beyond.
- Independent, conflict-free reviews
- Backed by real construction experience
- Flexible engagement — remote or on-site
Global advisory & assurance services
These services are delivered to clients across the globe, remotely and on-site, against international and local codes and standards.
Building Design Reviews
Independent, multidisciplinary review of your architectural, structural and services designs to confirm they are safe, compliant and buildable before construction begins.
- Code & standards compliance checks
- Structural & architectural buildability review
- Constructability and value-engineering input
- Drawing, specification & calculation review
Safety Reviews & Design Audits
Rigorous, independent safety reviews and design audits that identify hazards and non-conformities, verify standards and give owners and regulators confidence in the design.
- Independent third-party design audits
- Structural safety & stability assessment
- Fire & life-safety design review
- Risk identification & mitigation reporting
Peer Review & Design Verification
Independent peer review of engineering calculations and models to validate assumptions, methods and results on complex or high-risk projects.
- Calculation & analysis cross-checks
- Structural model verification
- Second-opinion engineering sign-off
Code Compliance & Quality Assurance
Assurance that designs and works meet applicable building codes, standards and regulatory requirements across jurisdictions.
- Regulatory & statutory compliance checks
- Quality-assurance review of documentation
- Due-diligence & technical feasibility studies
Building Design Reviews
Before a single brick is laid, we examine your design the way an experienced builder and engineer would — looking for anything that could compromise safety, compliance, cost or programme. Our reviews are independent, structured and documented.
What we check
- Structural adequacy
- Code & by-law compliance
- Buildability & detailing
- Load paths & stability
- Drawing coordination
- Specification clarity
What you receive
- Prioritised findings report
- Clear recommendations
- Risk-rated issues list
- Review close-out support
Safety Reviews & Design Audits
An independent audit is your assurance that a design is not just complete, but safe. We assess the design against recognised standards, challenge assumptions, and document every finding so stakeholders can act with confidence.
Our focus areas
- Structural safety & stability
- Fire & life-safety provisions
- Means of escape
- Hazard identification
- Standards conformance
- Documentation integrity
You walk away with
- Independent audit report
- Non-conformity register
- Mitigation guidance
- Stakeholder-ready summary
Construction & development services
Alongside advisory work, we design and deliver buildings end-to-end.
Construction & Development
Delivery of residential, commercial and institutional buildings — from groundwork to handover.
Structural Engineering & Design
Sound, efficient structural design and detailing tailored to site conditions and loads.
Project & Construction Management
Programme, cost and quality control to keep projects on time and on budget.
Site Supervision & Inspection
On-site quality inspection to confirm works are executed as designed and specified.
Feasibility & Technical Due Diligence
Early-stage studies that de-risk investment and development decisions.
Consulting & Advisory
Trusted technical guidance for owners, developers and contractors throughout the project.
Reviewed against the standards that matter
Every engagement is measured against the applicable national building codes and recognised engineering practice.
National Building Code
Compliance with NBC and local by-laws.
Structural standards
Design verified to relevant IS/structural codes.
Fire & life safety
Means of escape and fire-safety provisions.
Quality assurance
Documented QA across design and works.
Working with us
It depends on the size and complexity of the project and the completeness of the information provided. A single-building review is often completed within one to three weeks of receiving full drawings; larger or phased projects are scheduled accordingly. We confirm the timeline in our proposal.
Typically your architectural and structural drawings, relevant calculations and specifications, the applicable codes, and a short brief on your objectives and constraints. We will tell you exactly what is needed once we understand the scope.
Yes. We can carry out a design audit or safety review at any stage, including works in progress, and advise on remedial actions where issues are found.
Absolutely. All drawings, data and findings are handled confidentially and shared only with the parties you authorise.
Need an independent review or a full delivery partner?
Tell us about your project and we'll recommend the right service for your goals.
Request a ConsultationA complete range of design assurance and construction services
Every project is different, so the support a client needs is different too. Some clients come to us with a finished design and simply want an independent expert to confirm it is safe and compliant before they build. Others want us to design and construct the whole project. Most sit somewhere in between. The services below are the building blocks we combine to fit your situation — and whichever ones you choose, they are delivered to the same standard of rigour and honesty.
Building design reviews
A building design review is an independent, multidisciplinary examination of your architectural, structural and services designs, carried out before construction begins. We check structural adequacy and stability, confirm that the design complies with the applicable codes and by-laws, assess how buildable the design actually is, and review the drawings, specifications and calculations for coordination and clarity. The output is a prioritised findings report that tells you exactly what needs attention and why — so your design team can resolve issues while they are still lines on a page rather than problems on a site. For many clients this is the single most cost-effective step in the whole project, because it prevents the expensive rework that follows when a flawed design is discovered mid-construction.
Safety reviews and design audits
A safety review and design audit go a step further, examining the design specifically through the lens of risk. Carried out independently of the original design team, our audit identifies hazards and non-conformities, assesses structural safety and stability, scrutinises fire and life-safety provisions and means of escape, and verifies that the design conforms to recognised standards. You receive an independent audit report, a register of non-conformities, practical mitigation guidance and a summary that is ready to put in front of stakeholders. For owners, investors and regulators, an independent audit is the assurance that a building is not merely complete on paper but genuinely safe to construct and occupy.
Peer review and design verification
On complex or high-risk projects, a second expert opinion on the engineering itself can be invaluable. Our peer review and design verification service cross-checks calculations and analysis, verifies structural models, and validates the assumptions and methods behind the design. It is the engineering equivalent of a second doctor's opinion before major surgery — a way to be sure that the thinking behind a critical structure is sound before you commit to building it.
Code compliance and quality assurance
Regulations exist for good reasons, and getting them wrong can stall a project or, worse, endanger its occupants. We provide assurance that designs and works meet the applicable building codes, standards and statutory requirements, including the National Building Code and relevant local by-laws. Alongside regulatory compliance, our quality-assurance review examines documentation for completeness and consistency, and our technical due-diligence and feasibility studies help clients de-risk investment and development decisions before they are made.
Construction and development
Where clients want us to build as well as review, we deliver residential, commercial and institutional buildings from groundwork to handover. Our construction and development service brings the same assurance mindset to the site: disciplined programme, cost and quality control, and a refusal to cut the corners that cause problems later. Because the same firm that reviews the design is accountable for building it, nothing gets lost in the handover between design and construction.
Structural engineering and design
Sound structure is the foundation of every safe building. Our structural engineering and design service produces efficient, well-detailed structural designs tailored to the specific loads, soil conditions and constraints of your site. Whether as a standalone service or as part of a full design-and-build engagement, our structural work is always carried out with constructability and long-term durability in mind.
Project management, supervision and advisory
Good design and good construction still need good coordination. Our project and construction management keeps programme, cost and quality under control; our site supervision and inspection confirm that works are executed exactly as designed and specified; and our consulting and advisory service gives owners, developers and contractors trusted technical guidance at every stage. Together these services make sure that the quality designed into a project survives all the way to completion.
How our engagements work
Most engagements begin the same way: you share your brief, drawings and objectives, we study them and recommend the right service, and we set out a clear proposal with scope, timelines and deliverables before any work starts. A single-building design review is often completed within one to three weeks of receiving full information; larger or phased projects are scheduled to suit. All drawings, data and findings are handled confidentially and shared only with the parties you authorise. Whether you need a single independent review or a full delivery partner, tell us about your project and we will recommend the most effective way forward.
Choosing the right service for your project
With so many services available, clients sometimes ask which one they actually need. The honest answer is that it depends on where your project is in its journey and what you are trying to protect against. If you have a design and want to be sure it is safe and compliant before you build, a building design review or safety audit is the right starting point. If you are making an investment or development decision, a feasibility study or technical due diligence will de-risk it. If you have a complex structure and want certainty about the engineering, peer review and design verification provide a second expert opinion. And if you want a single partner to design and build your project end to end, our construction and development service brings all of this together.
You do not need to decide alone. When you describe your project to us, part of our job is to recommend the service — or combination of services — that gives you the most protection for the least cost. We would rather steer you towards a focused review that solves your real problem than sell you a larger engagement you do not need. That advice costs you nothing, and it is the best way to make sure your money is spent where it matters.
Engagement models that fit how you work
We structure our engagements to suit the project. For a defined piece of work, such as reviewing a single building's design, we agree a fixed scope, fee and timeline up front, so you know exactly what you are getting. For ongoing or larger projects, we can work on a staged basis, delivering and billing against agreed milestones. For construction and development, payments are tied to the stages of the work. Whatever the model, everything is set out clearly in a written proposal before we begin, and all drawings, data and findings are kept strictly confidential.
What you can expect from working with us
Clients who work with us can expect independence, clarity and accountability. Our reviews are genuinely independent of commercial pressure, so our findings are honest. Our reports are clear and prioritised, so you know what to do first. And we stand behind our work, remaining available to help you act on our recommendations. Whether you need a one-off review or a long-term delivery partner, the standard never changes. To find the right service for your project, tell us what you are planning and we will point you in the right direction.